Mode |
THMBJ-001 |
|
Product |
Wheel raw casting:Diameter15"-26:,Width 5"-14" |
|
Equipment function |
Rough machining of the casting blanks of the wheel to automatically remove the burrs on the upper and lower rims of the hub Achievable functions:automatic centering of the wheel,automatic conveying wheel,automatic driving wheel and automatic burr removal |
|
Equipment introduction and parameters |
Equipment composition:centering mechanism,de-flash machine,soundproof cover and control system. |
|
t is recommended that the chip burr thickness should be ≤2mm and length ≤30mm |
||
WorkcycleCT:25s/pc. |
||
Alignmentagency |
Roller table mechanism:driven by a motor,the standard roller conveys the product.Conveying speed 7-8m/min |
|
Centering mechanism:driven by air cylinder,using link mechanism to ensure the synchronous action of the centering plate,so that the wheel is in the center position before entering the de-flash machine.The cylinder stroke is 300mm. |
||
De-flash machine |
Frame structure:it is made of welded profiles and plates,and is equipped with adjustable foot and ground fixing to ensure the stability of the upper structure |
|
Transmission mechanism:driven by a motor and driven by a sprocket,the casting is transported to the working position through the movement of the chain.Conveying speed 9-10 meters/min. |
||
Lifting mechanism:driven by the air cylinder to lift the casting to the clamping position.Cylinder stroke 60mm. |
||
Driving mechanismThe clamping wheel driven by the cylinder clamps and holds the casting.The high rigid structure ensures that the casting has no shaking and displacement when the burr is removed.The clamping wheel is driven by the motor to rotate so that the casting is uniform.Chip feed 800mm/s. |
||
Upper cutting mechanismdnven by cylinder,move the blade near the casting and cut off the rough edge.Cylinder stroke is 50mm. |
||
Cutting mechanism:driven by cylinder,cut the rough edge by cutting the blade near the casting.Cylinder stroke is 50mm |
||
Soundproof:It is used to block noise and splash of debris. |
||
Characteristic |
Applicable to different wheel types,reserved for automation interface |