Model |
THDYJ-A26C1200/400-400 |
|
Mold Connection Specification |
Upper Column Spacing:1180*1180mm |
|
Opening and closing mold distance:550-1650mm |
||
Distance between side mold oil cylinder center and bottom mold plate:200-250mm |
||
Upper mold moveable plate(length*width*thickness):1570*1570*95mm |
||
Opening and closing mold size of side core:Min 820mm;Max 1320mm |
||
Holding Furnace Capacity |
Pressurized Chamber 400kg,Stewing Chamber 1200kg,Pressurized Chamber 400kg |
|
Side Core Installation Angle |
Side Core can be installed at 90° |
|
Mold cooling |
20 channels of air&water cooling circuit,8 channels of upper mold and 12 channels of lower mold |
|
EnterAnd Eit Mode of Hoking Fumace Quantity of Riser Tube |
Fixed Holding Furnace11-4 pcs (optional) |
|
Filling Contro |
PID method for high pression filling control with either proportional valve or digital valve block |
|
Mold Cooling |
.Glass flowmeter 2.Digital flowmeter 3.Digital flowmeter+Proportionate valve contro 4.1-96 cooling circuits (optional 5.Brand:SMC,KEYENCE,IFM,BURKERT |
|
Hydraulic System |
Adopt servo hydraulic drive,"Parker"servo vane pump,"PHASE"Servo Motor |
|
Electric System |
SIEMENS S7-1500+HM |
|
Certificate |
Compliance with ISO mechanical IEC,electrical standards and CE certification |
|
Characteristic |
1.With continuous casting,it is increasing 10%-20%production per day 2.Liquid quiescence,kept the temperature as 700℃±1it is improving aluminum liquid and part quality 3.Two pressurized chambers share a stewing chamber,it is reducing the floor space and energy lost. |